Key parameters of LED wall washers

Compared with other engineering lighting fixture products LED wall washers are more prominent in their expected performance in highlighting the exterior and design decoration of architectural projects. Of course, such essential lighting equipment must receive particular attention during maintenance. In contrast to the maintenance of roadway streetlights, if a light does not illuminate in a commercial center's lighting project, it will be very noticeable. Therefore, choosing a reliable manufacturer of LED wall washers is a serious and meticulous challenge from the beginning. Let's look at the main parameters of LED wall washers together.

Working voltage: The working voltage of LED wall washers can be subdivided into: 220v, 110v, 36v, 24v, 12v, so pay attention to the corresponding working voltage when choosing a switching power supply.

Working temperature: As wall washers are generally used outdoors, this main parameter becomes very critical, and the requirement for environmental temperature is also high. Generally, everyone specifies that they can work at outdoor temperatures of -40°C and 60°C.

Outdoor wall washers are aluminum-shelled and good at heat dissipation. Most wall washers can meet the requirements.

Number of LED beads: The total number of light-emitting diodes in a universal wall washer is 9/300 mm, 18/60 mm, 27/900 mm, 36/1000 mm, and 36/1200 mm.

Waterproof rating: This is the main parameter of the wall washer and the major index value that currently affects the quality of the linear light. We have to make strict rules, specifying that the waterproof rating for outdoor applications should be above IP65. We also need to specify corresponding compressive, crack resistance, high and low temperature resistance tests, flame retardant, impact aging resistance levels IP65, where 6 means complete avoidance of smoke and dust, and 5 means harmless washing with tap water.